June 21, 2024

Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1 Slide 1
Form Factor
IP Core

High Pin Count FMC Carrier
Kintex-7 Processing PCIe Card

The FMC-NKS-K017-PCIe-A board is a high performance FMC industrial carrier card based on the Xilinx Kintex-7 FPGA family and plugged into a serial PCIe bus system unit supporting 1x and 4x PCIe data paths, Ethernet10/100/1000 and SATA. This board also provides a developed platform for designing and verifying Kintex-7 FPGA based PCIe and stand-alone applications. Communication with a host computer via the PCIe bus and other interfaces enables users to control the card, modify algorithm settings and process real-time signals. The on-board FPGA Mezzanine Connectors (FMC) can make a high bandwidth data transfer channel with VITA 57.1 standard modules.


• Kintex-7 XC7K325T-2FFG676I Xilinx Device Compatible with 410T, 160T and 70T Kintex-7 Family for management fees
• Spartan-3 XC3S700AN Xilinx Device
• 3x SATA ii, iii
• PCI Express x4 Edge Connector
• FMC HPC for ADC/DAC FMC Modules Connect to FPGA
• QTH Connector Connect to FPGA Spartan-3
• 8 Gb DDR3 Component Memory
• Ethernet PHY 10/100/1000 Interface with RJ-45 Connector
• USB JTAG Module
• User Push-button, Switches, LEDs
• Multi-boot Configuration
• Power on/off Slide Switch
• 12V PCIe HDD Connector or External Voltage Supply
• Physical Dimensions (L: 185 mm, W: 135 mm)
• Industrial Temperature Range
(-40°C to 85°C)
• Operation System Support: Windows & Linux

Block Diagram


- Communications

- Multimode Digital Recievers (3G)

- Ultrasound Equipments

- Broadband Data Applications


Compatibility Table



NIKSOO Wave Processing Technology Engineering Corporation operates in the field of Biomedical, electronics and telecommunication, base-band and signal processing, installation and lunching, consulting and software production.

© copy right 2012 &all rights reseved by NIKSOO Wave Processing Technology Engineering Corporation